This information is based on our experience and is provided as a recommendation. No liability will be accepted for any damage resulting from use without prior testing or improper application.
Before use, shake the adhesive spray thoroughly. The surfaces to be bonded must be dry, clean, and free of any adhesive residue.
For non-absorbent surfaces, apply the adhesive to both surfaces and allow it to dry for approximately 15 minutes at 20°C. After drying, the adhesive should have a consistency that does not string when touched. Bond the surfaces together using maximum possible pressure.
For absorbent surfaces, apply the adhesive to one surface only and immediately bond the surfaces together using strong pressure.
Spray from a distance of approximately 20–25 cm.
To prevent the aerosol nozzle from becoming clogged, turn the aerosol upside down after use and spray until no more adhesive is discharged.
With its high and immediate bonding strength and versatile application, it is suitable for bonding lightweight materials together. This adhesive spray is suitable for bonding the following materials: paper, cardboard and wood, thin sheets, cork, leather, textiles, flexible foam (e.g., Moltopren), rigid foam (e.g., polystyrene), rubber and foam rubber, and synthetic films (excluding PVC and polyethylene).
Please describe your application so that we can provide you with some initial guidance.
Contactez Kimitec avec votre référence produit et votre contexte d’utilisation.
